MayFlash Wireless Controller Adapter PS4/PS3/PC MAGIC-S

MAGIC-S Wireless Controller Adapter for PS4, PS3 and PC

Yhdistä PS4, PS3, WiiU PRO, Nintendo Switch PRO, Nintendo Joy-Con tai Xbox One S Bluetooth ohjaimesi PS4, PS3 tai PC koneeseesi.

Wirelessly connect your PS4, PS3, Wii U Pro, Nintendo Switch Pro, Nintendo Joy-Con and Xbox One S Bluetooth controllers to your PS4, PS3 or PC system.
The wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers like Logitech rumble gamepad F510 and F310 can be connected to your PS4, PS3 and PC system.
Plug and Play!!

Quick Start Guide
Buttons and LED Indicators
1.USB A-Male: Connect the adapter to the PS4, PS3 and PC system.
2.USB A-Female: Connect the wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers to the adapter.
3.LED Indicators
-LED Indicator in Blue: PS4 System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired

-LED Indicator in Red: PS3 or PC System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired

-LED Indicator in Green: PC Xinput System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
Note:
The Bluetooth is not connected yet if LED Indicators blink slowly (around 2 times/second).

4.Button on the side of the adapter: Used for the modes switch and Bluetooth pairing.
- Press the button shortly to SYNC the controllers and the adapter. The indicator blinks quickly.
- To switch the modes, press and hold the button located on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS4 system mode, red for the PS3/Dinput mode and green for the PC Xinput mode.

Bluetooth Controllers Set Up
1.Firstly connect the PS4 or PS3 system to a TV. Just turn on your PC if you use the adapter on your PC system.
2.Connect the adapter into any spare USB port on your PS4,PS3 or PC system.
3.To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS4 system mode, red for the PS3/Dinput mode and green for the PC Xinput mode.
4.Turn on the Bluetooth controllers
5.To sync the Bluetooth controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator blinks quickly.
Note:
If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not included in the packaging, you can purchase it separately). As soon as the controller is identified by the system, you can remove the USB cable and start to SYNC it again.
6.The Bluetooth has been paired if the LED indicator lights up.
7.Your controller is now ready to use.

Wired Controllers Set UP
1.Firstly connect the PS4 or PS3 system to a TV. Just turn on your PC if you use the adapter on your PC system.
2.Connect the adapter into any spare USB port on your PS4,PS3 or PC system.
3.Connect the wired controllers to the adapter.
4.Your controller is now ready to use.

Update the Software
If you are having problems with the adapter, you can follow the below instructions to update the software.
1. Download the software from http://www.mayflash.com/Support/Download/ and install it on your Windows system.
2. Double click on the updater and leave the updater window open on your screen.
3. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC.
4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.
5. Select “Update”.
6. Do not disconnect the device until you are informed that the updated was completed successfully.

Note:
1. Only one Bluetooth controller is supported for one adapter.
2. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
Note:
Connect the wireless PS4, PS3, Nintendo Switch Pro, Xbox One S Controller to the adapter using a USB cable (coming with your game console system or you can purchase it separately)
Xbox 360 controller must be a wired one, not a wireless controller plus a USB cable.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds. This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro controllers to a PC Xinput system.
4. When you connect your Joy-Con controllers to PS4 system by the MAGIC-S adapter, if you press the buttons "L3" and "R3" at the same time, it works as the Touch Pad button.
5. The Capture Button of Joy-Con and Switch Pro controller works as the Touch Pad button when you connect your Joy-Con or Switch Pro controller to your PS4 system.
6. Logitech wireless gamepad F710 is supported. Please make sure you connect the emitter to the adapter before using.

IMPORTANT for v3:
1. When you connect your Joy-Con controllers to PS4 system by the MAGIC-S adapter, if you press the buttons "L3" and "R3" at the same time, it works as the Touch Pad button
2. The Capture Button of Joy-Con and Switch Pro controller works as the Touch Pad button when you connect your Joy-Con or Switch Pro controller to your PS4 system.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds.

This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro controllers to a PC Xinput system.

Please know that it is compatible with NeoGeo Mini now, please visit the Mayflash official site and download the specific firmware
http://www.mayflash.com/Support/Download/


Package includes:
1 x MayFlash Magic S Wireless Controller Adapter

39,98 €
alk. 8,00 €/kk VPD tilillä
VPD Laskulla korotonta ja kulutonta maksuaikaa 30.11. asti
  • Loppuunmyyty
Lisää koriin
Kuvaus

MAGIC-S Wireless Controller Adapter for PS4, PS3 and PC

Yhdistä PS4, PS3, WiiU PRO, Nintendo Switch PRO, Nintendo Joy-Con tai Xbox One S Bluetooth ohjaimesi PS4, PS3 tai PC koneeseesi.

Wirelessly connect your PS4, PS3, Wii U Pro, Nintendo Switch Pro, Nintendo Joy-Con and Xbox One S Bluetooth controllers to your PS4, PS3 or PC system.
The wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers like Logitech rumble gamepad F510 and F310 can be connected to your PS4, PS3 and PC system.
Plug and Play!!

Quick Start Guide
Buttons and LED Indicators
1.USB A-Male: Connect the adapter to the PS4, PS3 and PC system.
2.USB A-Female: Connect the wired PS4, PS3, Nintendo Switch Pro, Xbox One, Xbox One S, Xbox 360 controllers and fight sticks, and standard wired USB controllers to the adapter.
3.LED Indicators
-LED Indicator in Blue: PS4 System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired

-LED Indicator in Red: PS3 or PC System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired

-LED Indicator in Green: PC Xinput System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet
LED Indicator blinks quickly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
Note:
The Bluetooth is not connected yet if LED Indicators blink slowly (around 2 times/second).

4.Button on the side of the adapter: Used for the modes switch and Bluetooth pairing.
- Press the button shortly to SYNC the controllers and the adapter. The indicator blinks quickly.
- To switch the modes, press and hold the button located on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS4 system mode, red for the PS3/Dinput mode and green for the PC Xinput mode.

Bluetooth Controllers Set Up
1.Firstly connect the PS4 or PS3 system to a TV. Just turn on your PC if you use the adapter on your PC system.
2.Connect the adapter into any spare USB port on your PS4,PS3 or PC system.
3.To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the PS4 system mode, red for the PS3/Dinput mode and green for the PC Xinput mode.
4.Turn on the Bluetooth controllers
5.To sync the Bluetooth controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator blinks quickly.
Note:
If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not included in the packaging, you can purchase it separately). As soon as the controller is identified by the system, you can remove the USB cable and start to SYNC it again.
6.The Bluetooth has been paired if the LED indicator lights up.
7.Your controller is now ready to use.

Wired Controllers Set UP
1.Firstly connect the PS4 or PS3 system to a TV. Just turn on your PC if you use the adapter on your PC system.
2.Connect the adapter into any spare USB port on your PS4,PS3 or PC system.
3.Connect the wired controllers to the adapter.
4.Your controller is now ready to use.

Update the Software
If you are having problems with the adapter, you can follow the below instructions to update the software.
1. Download the software from http://www.mayflash.com/Support/Download/ and install it on your Windows system.
2. Double click on the updater and leave the updater window open on your screen.
3. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC.
4. As soon as the driver window indicates under “Device” that the adapter has been recognized, you may release the button.
5. Select “Update”.
6. Do not disconnect the device until you are informed that the updated was completed successfully.

Note:
1. Only one Bluetooth controller is supported for one adapter.
2. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
Note:
Connect the wireless PS4, PS3, Nintendo Switch Pro, Xbox One S Controller to the adapter using a USB cable (coming with your game console system or you can purchase it separately)
Xbox 360 controller must be a wired one, not a wireless controller plus a USB cable.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds. This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro controllers to a PC Xinput system.
4. When you connect your Joy-Con controllers to PS4 system by the MAGIC-S adapter, if you press the buttons "L3" and "R3" at the same time, it works as the Touch Pad button.
5. The Capture Button of Joy-Con and Switch Pro controller works as the Touch Pad button when you connect your Joy-Con or Switch Pro controller to your PS4 system.
6. Logitech wireless gamepad F710 is supported. Please make sure you connect the emitter to the adapter before using.

IMPORTANT for v3:
1. When you connect your Joy-Con controllers to PS4 system by the MAGIC-S adapter, if you press the buttons "L3" and "R3" at the same time, it works as the Touch Pad button
2. The Capture Button of Joy-Con and Switch Pro controller works as the Touch Pad button when you connect your Joy-Con or Switch Pro controller to your PS4 system.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button “START” and “A” for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds.

This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro controllers to a PC Xinput system.

Please know that it is compatible with NeoGeo Mini now, please visit the Mayflash official site and download the specific firmware
http://www.mayflash.com/Support/Download/


Package includes:
1 x MayFlash Magic S Wireless Controller Adapter

Lisätietoja
Lisätietoja
Takuu6 kk
Arvostelut
Write Your Own Review
1
2
3
4
5
Laatu
Hinta